Suction cups are practical items which you can probably find around the house. They are very effective for wall-hanging and can also offer some grip on things that tend to slip off in smooth surfaces such as shower wall, glass (window, mirror). Common uses include support for soap dishes, towels, or decor. Proper maintenance is required for suction cups of any type to operate properly and last long. With a few simple steps, you can ensure that the suction cups remain in tip-top shape and be ready whenever you need them.
Ways to Extend Lifespan of Your Suction Cups
Proper care is vital in keeping your suction cups functioning properly. They resist sticking better on clean and good condition surfaces. You can follow some simple steps, such as:
Rengör ytan
When you press a sucker against something, ensure that surface is clean and smooth. That means it has to be clean, without dust and dirt or other things like human oils that can build over time. The suction cup may not suck on the clean surface, and it is easy to fall. Using a clean cloth, wipe the surface clean of dust or dirt. Then dry it very well. Not only should the surface be free from dust, but a clean surface also creates a good seal for the suction cup, which is critical for holding power.
Wash the Suction Cup
But suction cups can become grimy after multiple uses, just like surfaces do. Keep them clean and operational by washing often. Remove the suction cup from where it is adhered to do this. Then you can wash it with warm water and soap. A mild soap is preferable to strong chemicals that can damage the lift platform itself.] Don't use rough scrubbers or sponges, as they can scratch the surface and make the suction cup less effective.
Skölj och torka
After cleaning the suction cup it is essential that you rinse it with clean water. It also helps to wash away leftover soap which can impact how well it adheres later on. Rinse and dry the suction cup with a clean towel or air dry thoroughly. Before you use it next, ensure it is dry. It also needs to be dry, otherwise, the suction cup will not adhere and you will end up looking for it on the floor, as it falls.
This post contains even more tips for how to give your suction cups some extra life
In addition to cleaning them, there are a few additional tips to help ensure your suction cups last as long as possible and perform as needed:
Store Them Properly
Your suction cups should be stored in a cool and dry place when not in use. Do not place them in direct sunlight or near heaters such as radiators or stoves. Suction cups can dry out from the heat, losing their stickiness. And when they are not needed, they can be stored in a drawer or cupboard, in order to be protected from damage and served effectively.
Replace Old or Damaged Cups
Suction cups are subject (eventually) to wear or breakage. When you observe that a suction cup is not making a good seal or if it displays any cracks or tears, it should be ready to be changed out for a new one. A broken suction is also hazardous as not only can things fall and break, but it can also lead to injuries. Before usage, check the suction cups regularly, for the good condition.
Use Them Correctly
Another consideration is how to properly use your suction cups. Just don't hang anything on top of them until they are stuck down properly. Overload a suction cup with excessive weight, and you could find it won't hold as needed. Of course, to get the best results you should follow any specific instructions that might come along with the suction cups. That way, you will not be hurting them and their surfaces would not be damaged too.
Here's How to Ensure Your Suction Cups Remain Functional
If you are looking to prolong the life of your suction cups, here are a few simple steps that you can follow. If you clean them often use them properly then they will last long and also work better. As long as you maintain your suction cups, they will serve you well whilst making life just a little bit easier.